03
2024
-
09
Use and Daily Maintenance of Laminating Machine
1. reasonable selection of laminating machine Solar cell module laminator can affect several key elements of the panel: 1. Make the bubble of the battery plate meet the requirements in the table;
1. reasonable selectionLaminating machine
solar cell moduleLaminating machineSeveral key elements that can affect the panel:
1. Make the bubble of the battery plate meet the requirements in the table;
2. The viscosity of the battery plate glue shall be qualified;
3. The bonding strength shall be qualified;
4. The rate of fragments should be low;
5. The plate shape of the battery plate, EVALaminating machineAfter high temperature. That is, size.
SelectionLaminating machineThe 1234 four items are each affected by vacuum value, temperature uniformity, and whether there is pressure transformation. However, the shape of the solar panel isLaminating machineSelection of the influence of the total area of the heating plateLaminating machineThe first element to consider isLaminating machineTotal area. To choose a total area of strong compatibility, in addition to taking into account the method of opening the cover, appearance, etc. Try to use more than one machine. After the selection, the manufacturer will carry out equipment adjustment under the specific guidance and enter the normal production and manufacturing application.
2.Laminating machineinto work attitude
After the self-examination,Laminating machineAble to work attitude.
3. actual operation sequence:
Press the vacuum pump button-check the main parameters of the processing process-check whether the temperature reaches the preset value-check whether the working attitude is fully automatic or manual, and set the fully automatic condition-check whether the mechanical pump has less oil-put it into the part to be pressed-close the cover-check the vacuum value-remove the part-check the part.
To ensure that all processes are in normal condition,Laminating machineinto all normal work attitude.
4.Laminating machineShutdown:
Laminating machineShut down when the need to turn off all switch power. In order to ensure that it is not operated by non-actual operation personnel, the emergency stop switch can be included in the standby category. The actual operation sequence is as follows:
Vacuum pump off-close the cover (the cover cannot be closed tightly)-heating off-power off-press the emergency button-turn off the main switch or: press the emergency button-turn off the electric switch.
5.Laminating machineOperation method after parking for a period of time:
Laminating machineAfter parking for a period of time, it is necessary to start according to all normal sequences. It is not allowed to put solar panels into operation. First, the machine is empty to operate two circulation systems, and the water vapor absorbed in the machine is removed from the clean side before all normal applications can be made.
Keywords: computer numerical control panel saw
Laminating machine
WeChat Consulting
HotLine
Business docking E-mail
Company Address
No.2,2nd West Ring Road,Xichong,Lunjiao,Shunde,Guangdong,China