02
2024
-
09
What are the noise sources of mechanical equipment in four-axis/five-axis machining centers?
In addition to the noise caused by the production and processing of workpieces, other noises in the four-axis/five-axis machining center are all abnormal. Some noises may be signs of common faults in CNC lathes, so some identification must be carried out.
Four-axis/five-axis machining centerWhat are the noise sources of mechanical equipment?
Throw away the noise caused by the production and processing of products,Four-axis/five-axis machining centerOther noises are all abnormal, and some noises may be signs of common faults in CNC lathes, so some identification must be carried out. The key to the emergence of noise is the mechanical equipment level and the 2 levels of CNC machine tools. Let's get to know today.Four-axis/five-axis machining centerWhat are the noise sources of mechanical equipment?
1,Four-axis/five-axis machining centerNoise caused by motor, etc:
Very common mechanical equipment noise is caused by the operation of the motor, such as the motor cooling fan damage or scratch the motor housing,Four-axis/five-axis machining centerNoise caused by motor instability. These aspects of the situation are well resolved, do not rely on unique instruments and equipment, if you listen attentively to the general noise source,
It is generally well resolved. There is also a bad solution isFour-axis/five-axis machining centerThe communication sound of the motor itself is the buzzing sound. This kind of noise cannot be removed, but this kind of noise is not quite large, nor is it a common symptom of failure, and is generally ignored.
2,Four-axis/five-axis machining centerNoise caused by the drive system drive belt
Four-axis/five-axis machining centerIn addition to those that connect the drive devices immediately, there are also those that connect according to the drive belt. Sometimes, if the drive belt is installed incorrectly, it will cause quite loud noise, and this kind of noise must be handled, otherwise it will lead to other common faults over a long period of time. In general, the key changes of such common faults are as follows: the supporting force of the transmission belt is too high or too low when it is installed, the transmission belt is seriously damaged, and the models and specifications of the replaced transmission belt and belt pulley do not meet, etc.
Keywords: computer numerical control panel saw
Four-axis machining center, five-axis machining center
WeChat Consulting
HotLine
Business docking E-mail
Company Address
No.2,2nd West Ring Road,Xichong,Lunjiao,Shunde,Guangdong,China